hello, im needing help with joint objects i dont under stand it.

Here is a guide to mod making http://forum.toribash.com/showthread.php?t=382379


Read this is it most likely will awnser your questions.

ive seen that before and it helped me but when it try stuff it goes bezerk.

Basicly you connect 2 objects and most of the time one of them is fixed (not moveable)
There must be at least 1 moveable object.
Then you have to set the speed it is rotating at.
The next one is is the strenght (the heavier the moveable obj the stronger it has to be)
Next one is upper and lower rotation (or how it`s called). Set these both to 0 if you want it to spin a full circle and keep spinng.
Then the axis the rotation is going around. I suggest to put 1 of them to 1 and the others to 0. And play around with them.
And don`t forget the coords of the joints (If you don`t know where to put it, put it to the fixed object).

If you have got any more specific questions i will try to answer them ;)

heres some stuff that happens when i try to make something i dont put anything spin on it it just goes wack
-----
nvm i was making it on a messed up thing to were it jacked up all the mods i was making. thanks anyway it still helped me.